Download ALESIS ADAT-LX20 Manual PDF

Read or Download ALESIS ADAT-LX20 Manual PDF

Best nonfiction_2 books

Modelling the Jagdpanzer 38(t) 'Hetzer' (Osprey Modelling 010)

Within the moment half global conflict II the German military confronted numerically more suitable armoured forces at the jap and Western Fronts. in an effort to counter this chance, tank destroyer construction was once elevated. this kind of tank destroyers used to be the Jagdpanzer 38 (t), or 'Hetzer', which proved to be a profitable layout with over 2,500 being produced within the 14 months prior to the top of the struggle.

Extra resources for ALESIS ADAT-LX20 Manual

Example text

Remember, if the Format label is lit, entering Record mode will format the tape and erase any existing material (see Chapter 3 for more about formatting). OTHER TRANSPORT BUTTONS You press… EJECT If tape is stopped Tape ejects EJECT on Master deck Master and slave tapes eject Tape begins rewinding at 40X play speed Tape rewinds at 3X real time and plays pieces of audio Tape fast forwards at 40X play speed Tape fast forwards at 3X real time and plays pieces of audio REWIND REWIND + PLAY (Review mode) FFWD FFWD + PLAY (Cue mode) 36 If tape is moving Tape stops prior to ejection Tape stops prior to ejection Same You see… Tape exits cassette well Tape exits master and slave cassette wells REWIND button lights steadily Same, except if recording, punches out first Same PLAY button lights steadily, REWIND light flashes FFWD button lights steadily Same, except if PLAY button lights recording, punches out steadily, FFWD first light flashes ADAT LX20 Reference Manual Chapter 4 - Record and Playback Basics To end a Cue or Review operation, press PLAY, STOP, REWIND, or FFWD.

When adjusting pitch, the TIME counter immediately displays the current amount of Pitch change as both a percentage (%) and as cents. ABS % 00 . 00 00 . 00 (Percentage) Action Raise pitch You press… PITCH UP button Lower pitch PITCH DOWN button / C (Cents) You see… Display PITCH indicator lights; TIME counter displays the current amount of Pitch change. Display PITCH indicator lights; TIME counter displays the current amount of Pitch change. After adjusting pitch, the TIME counter reverts to displaying the current tape location.

To go in and out of record on the individual tracks while record mode is engaged, press any of the RECORD ENABLE buttons 1 – 8. Record-enabled tracks will have their REC light lit. If no tracks are recordenabled during recording, the RECORD light will flash. To quit recording without stopping the tape, press PLAY. The RECORD LED turns off, while the PLAY LED remains lit. To quit recording and stop the transport, press STOP. The RECORD and PLAY LEDs turn off; the STOP LED lights. P LAYBACK There are several ways to quickly play back your recording; this method involves the transport button.

Download PDF sample

Rated 4.89 of 5 – based on 4 votes